Make your own Easter greeting card

Easter is coming and it is a good habit to send the greetings to the friends or relatives on a greeting card. Since couple of years I make such cards by myself, which is a lot of fun and gives the cards uniqueness and personal touch.
Last year I described some techniques useful for this kind of photography. In this post I am going to describe the whole process of making such card, from the basic concept, to the publication.

Easter theme

All starts by selecting the basic theme. The symbolic of Eastern is focused on the symbols of new life: eggs, chickens, green and yellow colors, hare. So it is almost unavoidable to have at least some of them on the card. In my first attempt I have chosen for eggs and chickens. 

The composition

I like postcards that have a 3D-look. So I wanted to compose a picture that would give strong impression of depth. To achieve that I set up the scene in three planes: foreground, with the eggs, middle part with the chickens, and the background with the hanging eggs:

The perceived depth of field can be manipulated by different aperture settings.

The light

The above picture was taken in the ambient light, coming from the window located right to the scene. I wanted to give the chickens some warm punch as key light. To do so, I have used two speedlights with the CTO filter placed left and right to the chickens:

To avoid light spilling both strobes were equipped with a snoot to focus the light beam. Both strobes were controlled from the camera build-in flash via the iTTL system of Nikon. First attempt:

The chickens are warmly lit, but the rest of the scene is dark. Too dark. Time to put the fill light. Fill light was been created by third flash and a golden reflector bouncing the light from the flash on the scene. After applying fill light the scene looked like that:

That is better. The scene still have a warm look and all elements on the foreground are properly lit. Last step is to improve the light in the background. To do so another flash was used, equipped with the yellow filter. I have experimented with several positions of the background flash:

Manipulating the background light was easy, I just held the flash light in my hand during shooting in the different places of the scene.
Finally I have chosen the middle image for further processing.

Post processing

For post processing I have used combination of Lightroom, Nik software suite and Photoshop.

In Lightroom I have applied lens profile and camera corrections.

In Nik software I have pre-sharpened the image (with RAW sharpener), applied the golden reflector filter, blur vignette (in Efex Pro), added some local brightness to the eggs in the background (with Viveza)

In Photoshop I have removed some distracting spots. There is the final picture:

Some technicalities

Reuse the setup

The whole 'production' took me about 3 hours. Since a lot of effort has been put in the light setup once the chickens were ready I decided to create another card, with a hare in the main role:

As one can see, the scene is very similar to those with chickens, yet different. Taking this picture took me just couple of minutes thanks to reuse of the existing setup.

Try different gels

When I was done with my basic setup I have tried to light the scene with flashes without gels:

It hasn't been chosen eventually but it is always worth experimenting with different settings and sometimes it can result in a new, inspiring scene.

Hanging eggs

To hang the eggs I have used a combination of the flash light stand and a piece of other pipe mounted on the light stand:

School portrets season is over - learnings and looking forward

The shooting of portraits for the Polish school in The Hague for 2012 is finished. Today I sent last photos for printing. As each year I try to put a new challenge on the area of photography and to experiment with something new. After all, it should be fun for everyone, including a volunteer photographer.

So this year I was using 3 light sources for the first time, building a classical setup: base light in front of the subject, left or right, background lighting to lit the background and the rim light coming from the  side, slightly behind the subject:

The light sources I have used for the setup were as follows:

- Base light (A) Lastolite's EzyBox Hotshoe 76x76cm powered with SB-900 in iTTL mode

- Background light (B): SB-600 placed on a boom arm behind a Lastolite's Tri grip diffuser. SB-600 set in manual mode on 1/4 of maximum power.

- Rim light (C): self-made 30x100 cm softbox with SB-900 set in iTTL mode.

The setup was controlled by the SB-910 flash placed on the camera.

The light setup was partially dictated by the background:

It felt more naturally to put the background light to the right letting the light travel along the lines formed by the orange clouds. So is the main light was placed also left to the photographed subject.

Before shooting I needed to decide whether to use a laptop and shoot in tethered mode or not. Finally I decided not to do so, mainly due to the number of children and the expected crowd and hectic during the session.

So what were the challenges this year? Here the list of most important ones:

1. Place the rim light efficiently to create the desired result,

2. Determine the limits of iTTL system and learn how to use it in such situations,

3. Learn how to deal with iTTL when there is no line of sight between the master flash and the remote units (and not ruin your budget),

4. Streamline the workflow during the session and during the post-processing efficiently so it doesn't take ages to come to the photos.

5. Fine tune the light setup to let children shine on a portrait (some information about it in my previous post)

6. Place the larger groups in front of the background of a limited size.

In coming posts I will take each challenge one by one and describe what I did to overcome it.

Let small object "hang" in the air (with no postprocessing and a lot of fun)

The idea described here came during preparing a set of Xmas postcards for our family and friends. I had a number of little Christmas decorations that together with other bigger subject could make a nice composition. The final product (one of several) looks like this:

So the decoration hangs in the air (which is a quite normal behavior for an angel) and candles below it lit the subject a little bit. No Photoshop (or other software) has been involved in this photo. The hanging effect is achieved purely mechanically. Here's how the concept basically works:

Scene setup in bird's view

The subject is supported by an aluminium pipe that is placed horizontally. Now if the camera lens is put at the same height as the hanging subject, the subject hides the pipe completely and we have a hanging angel (or Santa, or whatever):

Scene setup showing orientation of a camera w.r.t. the support and the  subject

The direction of the aluminium pipe doesn't need to be exactly horizontal. Important is that it matches the line of sight of the lens and the pipe remains invisible behind the subject.

When basis is done the rest is to choose a proper lighting for the subject and decide what to do with the background. If one wants to try the setup here are some practical tips:

• As a support for the pipe I have used an Lastolite umbrella stand with hotshoe swivel. The hole which is normally used for mounting an umbrella was used to hold the aluminium pipe.
• It is convenient to be able to regulate somehow the length of the pipe. I started with the length of 1.35m but then I realized that the subject is too close to the background and light doesn't drop enough with this distance to have a close to black background. A length of 2.4m worked well.
• To mount the subjects to the pipe I have used a removable adhesive from Tack-It. But any brand of course would be good as long as the subject is not too heavy.

If you are interested let me know, I can upload some more pictures showing the details of the setup.